GOT A SPEED TRIPLE? NEED TRIUMPH PARTS? CHECK OUT THE GOODS.
Brake parts, electrical, filters, chains and sprockets in stock and ship free to the lower 48.
The Triumph Speed Triple was initial released in 1994 as a nod to the 1938 Speed Twin. With the same engine as the Daytona, Thunderbird, and Trident many parts fit different models. It has seen many generations since its first iteration and has always been a favorite of Triumph fans for its responsive handling and sleek look.
TRIUMPH BONNEVILLE 900CC EBC REAR BRAKE PADS PN MBI-FA214/2
- Organic brake pads provide excellent brake response with medium lifetime.
- Aramid fiber organic brake pad (96.5x42x9.5mm & 77.5x42x8mm).
- Longest lasting brake pads available, resulting in longest rotor service life.
TRIUMPH SPEED TRIPLE 1050 EBC REAR BRAKE HOSE (NON-ABS) ’04-10 PN MBI-BLM8212-1R
- Stainless steel braided PTFE brake lines improve brake response.
- 100% pressure tested; Made in the UK from EBC.
- Single piece replacement brake line with corrosion resistant stainless steel fittings for ’04-10 Speed Triple 1050 VIN 461332>735437.
- The hose length from the center of each banjo is 48.5″.
TRIUMPH SPEED TRIPLE 1050 EBC FRONT BRAKE HOSE SET (NON-ABS) ’04-10 PN MBI-BLM8212-3F
- Stainless steel braided PTFE brake lines improve brake response.
- 100% pressure tested; Made in the UK from EBC.
- Three piece replacement brake line set with corrosion resistant stainless steel fittings for 04-10 Speed Triple 1050 VIN 461332>735437.
The hose length from the center of each banjo is 24.5″ and the length from the banjo to the center of the cross hose is 22.5″.
TRIUMPH SPEED TRIPLE TIGER SPORTBIKE BIKEMASTER AIR FILTER (1) PN MBI-TB001
- Precision-woven, 304 stainless steel, outer-screen construction offers triple-layer protection and increased air flow over stock filter, which may require re-jetting or re-mapping.
- The “triple-layer protection” contains two epoxy-coated layers of strong steel mesh and one layer of non-woven material.
- It will last the lifetime of your vehicle with proper care.
TRIUMPH BONNEVILLE UNIVERSAL 50A REGULATOR/RECITIFIER FOR LIQUID COOLED (1) PN MBI-208724
- Your regulator/rectifier turns 3 phase AC into 14V DC.
- Regulator/Rectifier for many models of Triumph motorcycles from 2009-present.
- Highest quality, direct replacement regulator/rectifiers for your powersports applications.
- Protect the integrity of your charging system with a properly functioning regulator/rectifier. Genuine O.E.M. replacements.
ALL BALLS STEERING HEAD BEARING KIT PN MBI-22-1053
- All Balls steering head bearing kits are direct OEM replacements. (NOTE: You will have one leftover bearing from this kit.)
- Use TBS-35-4506 to remove old bearing races.
TRIUMPH MOTORCYCLE 19T FRONT SPROCKET (530 CHAIN) PN MBI-D530T19
- BikeMaster® Sprockets are meticulously engineered using the highest quality materials and industry leading technology to provide the best replacement sprockets for your motorcycle.
- This top-condition 19T front sprocket is heat treated for extended durability and fits 1990-2004 liquid cooled triples along with others.
Frequently Asked Questions
When did Triumph release the Speed Triple?
Triumph released the first Speed Triple in 1994 as a nod to the 1938 Speed Twin. That first model, the T309, used the same 885 cc liquid-cooled triple as the Daytona, Thunderbird and Trident, so many parts fit several models (Wikipedia). It has gone through many generations since, and riders have always liked it for its responsive handling and sleek look. Find parts for your year in Shop by Vehicle.
What are the different Triumph Speed Triple generations?
The main generations are the 1994–1997 T309 (885 cc, carbureted), the 1997–1998 T509 (885 cc, fuel-injected), the 955i, the 2005 Speed Triple 1050, a major 1050 update in 2011, and the Speed Triple 1200 launched in 2021 (Visordown). Over that time, displacement grew from 885 cc to 1160 cc. Parts often differ by generation and VIN, so check fitment before you order.
Do Triumph Speed Triple parts fit other Triumph models?
Often, yes. Early Speed Triples shared their modular triple engine with the Daytona, Thunderbird and Trident, so many parts fit several models. For example, the BikeMaster 19-tooth front sprocket for 530 chain fits 1990–2004 liquid-cooled triples along with other models. The BikeMaster air filter fits the Speed Triple, Tiger and other Triumph sportbikes.
What brake pads fit a Triumph Speed Triple?
British Iron recommends the EBC FA214/2 rear brake pads. These organic pads give excellent brake response and medium pad life. They use aramid fiber in two sizes (96.5 × 42 × 9.5 mm and 77.5 × 42 × 8 mm) and are made to last long, which also helps the rotors last longer. See more pads and rotors from EBC and in Brakes.
Are braided stainless steel brake lines worth it on a Speed Triple?
Yes, for better brake response. EBC’s stainless steel braided PTFE brake lines firm up the brake response compared to rubber hoses; are 100% pressure tested and are made in the UK. They come with corrosion-resistant stainless steel fittings. If you’re replacing old hoses on a bike that has sat for a while, the Triumph hydraulic brake restoration guide covers flushing the system and rebuilding the calipers.
What brake hoses fit a 2004–2010 Speed Triple 1050?
For non-ABS 2004–2010 Speed Triple 1050s with VINs 461332 to 735437, the EBC rear brake hose (BLM8212-1R) is a one-piece line, 48.5″ between banjo centers. The EBC front brake hose set (BLM8212-3F) is three pieces: 24.5″ between banjo centers and 22.5″ from the banjo to the center of the cross hose. Check your VIN before ordering, since these lines are for non-ABS bikes only.
Will a high-flow air filter affect my Speed Triple’s performance?
It can. The BikeMaster air filter (MBI-TB001) has a woven 304 stainless steel outer screen with triple-layer protection: two epoxy-coated steel mesh layers and one non-woven layer. It flows more air than the stock filter, so your bike may need rejetting or remapping. Carbureted owners should see the CV carb cleaning and tuning guide. With proper care, the filter lasts the life of the bike. More options are in Air Intake and Filters and from K&N.
What does a motorcycle regulator/rectifier do?
A regulator/rectifier turns the alternator’s three-phase AC output into about 14 V DC to charge the battery and power the bike. A properly working unit protects the whole charging system. The universal 50A regulator/rectifier for liquid-cooled Triumphs (MBI-208724) is a direct replacement for many 2009-and-later Triumph models. More charging parts are in Electrical and Ignition and from Electrosport.
How do I replace the steering head bearings on a Speed Triple?
The All Balls steering head bearing kit (MBI-22-1053) is a direct OEM replacement. You’ll have one bearing left over from the kit. Use the steering bearing race puller (TBS-35-4506) to remove the old races. To check for worn steering head, wheel and swingarm bearings, see the Hinckley Triumph maintenance and restoration guide. Find more kits from All Balls Racing.
What front sprocket fits an early Speed Triple?
The BikeMaster 19-tooth front sprocket for 530 chain fits 1990–2004 liquid-cooled Triumph triples, among others. It’s heat treated for longer life. Changing tooth count changes your final drive ratio, which the motorcycle chains and sprockets guide explains. Browse more in Chains and Sprockets and from BikeMaster.
Where can I find a service manual for my Triumph Speed Triple?
Haynes and Triumph factory manuals cover service intervals, torque specs and step-by-step procedures. Owner’s handbooks for Hinckley Triumphs are in the Triumph owner’s handbook library. For hands-on help with an early triple, start with Part 1: Resurrecting a Barn Find Hinckley.
Does British Iron offer free shipping on Speed Triple parts?
Yes. Speed Triple brake, electrical, filter, chain and sprocket parts are in stock and ship free to the lower 48 states. If you’re not sure a part fits your bike, contact British Iron with your model year and VIN.
