,

Triumph ’13-up Daytona 675 EBC Clutch Kit PN MBI-CK5664

$114.04

Availability: Only 2 left in stock

- +

Triumph Daytona Clutch Kit EBC CK5664 – Daytona 675

The EBC CK5664 clutch kit is a complete engine set of nine cork-based friction plates for the 2013-on Triumph Daytona 675 and Daytona 675R, from VIN 564948. It is made for the slip-assist clutch Triumph introduced with the all-new short-stroke 675cc triple in 2013, and it replaces Triumph friction plate part numbers T1170806 and T1170807.

Made in the UK by EBC Brakes, the CK Series is an OEM-type replacement plate. It’s the right choice when your Daytona’s clutch slips under hard acceleration, drags, or has worn past its service limit, and you want stock-like feel and lever effort.

What’s in the EBC CK5664 Kit

  • 9 friction plates: a complete engine set made up of EBC’s replacements for 6x T1170806 and 3x T1170807
  • Not included: steel drive plates, clutch springs, and the clutch cover gasket

Key Features

  • Cork-based friction material with alloy particles: EBC impregnates the cork facing with aluminum particles to improve wear life and heat resistance and to resist burn-up and slip.
  • Highly compressed facings: the material resists swelling in oil, which helps prevent clutch drag and hard neutral finding.
  • Stack-height controlled: every CK kit is matched and measured so the full pack restores the correct stack height. EBC recommends replacing the full set and not fitting individual plates.
  • OEM-type feel: engagement and lever effort stay close to stock, and the plates work with the Daytona’s factory slip-assist clutch.

Fitment: 2013-On Triumph Daytona 675

  • Triumph Daytona 675, 2013-on (from VIN 564948)
  • Triumph Daytona 675R, 2013-on (from VIN 564948)
  • ABS and non-ABS models

Check your VIN first. The 2006–2012 Daytona 675 (up to VIN 564947) and the 2011–2012 Daytona 675R use the earlier engine and a different plate set, the Triumph Daytona/Tiger 800 EBC Standard Clutch Kit CK1206. The 2013-on Street Triple 675 and the 2017-on Street Triple 765 do not use CK5664. EBC lists CK1206 for those models.

Installation Tips

  • Soak the new friction plates in clean engine oil before fitting. Dry plates can grab or glaze on first use.
  • Note the order and position of each plate as you remove it. Fit the new plates in the same positions, following your Triumph service manual.
  • Check the steel drive plates for warping, blueing, or glazing. Replace them if they aren’t flat.
  • Inspect the clutch springs and replace them if they’re shorter than the service limit in your manual.
  • Use a clutch holding tool to stop the clutch turning while you remove and torque the clutch hub nut. Don’t use screwdrivers or pry bars against the basket.
  • Use the engine oil grade in your Triumph handbook. Use a motorcycle oil rated for wet clutches, not car oil with friction modifiers.
  • Fit the clutch cover with new gaskets, torque the bolts to the figures in your Triumph service manual, then check clutch cable free play.

Related Parts for Your Daytona 675

Learn more about the friction material on the EBC Brakes Standard CK Series page, or browse all EBC parts at Modern British Iron.

_____________________________

Frequently Asked Questions

What Triumph models does the EBC CK5664 clutch kit fit?

It fits the 2013-on Triumph Daytona 675 and Daytona 675R from VIN 564948, with or without ABS.

Which Triumph part numbers does CK5664 replace?

It replaces Triumph friction plate part numbers T1170806 and T1170807. The kit contains EBC’s replacements for 6x T1170806 and 3x T1170807.

How many friction plates come in the CK5664 kit?

Nine. It’s a complete engine set, so all the friction plates in the clutch are replaced at once.

Does the EBC CK5664 include steel plates and clutch springs?

No. CK5664 includes friction plates only. Steel drive plates, clutch springs, and the clutch cover gasket are sold separately.

Will CK5664 fit my 2006–2012 Daytona 675?

No. The 2006–2012 Daytona 675 up to VIN 564947 and the 2011–2012 Daytona 675R use the earlier engine and clutch. Use the EBC CK1206 kit for those bikes.

Why did the clutch plates change on the 2013 Daytona 675?

Triumph gave the 2013 Daytona 675 an all-new short-stroke engine with a slip-assist clutch that lightens lever effort and reduces rear wheel hop under hard braking. The new clutch uses different friction plates, so it needs a different kit.

Does CK5664 fit the Street Triple 675 or Street Triple 765?

No. The 2013-on Street Triple 675 kept the earlier Daytona engine, and EBC lists the CK1206 kit for the Street Triple 675 and the 2017-on Street Triple 765.

Do EBC CK plates work with the Daytona’s slip-assist clutch?

Yes. CK5664 is an OEM-type replacement for the factory plates in the 2013-on Daytona’s slip-assist clutch, so the slipper action and light lever feel stay the same.

What friction material does the EBC CK Series use?

Cork-based friction material impregnated with aluminum particles. It’s highly compressed to resist swelling and drag, and it gives an OEM-type feel.

Should I soak the new clutch plates before installing them?

Yes. Soak the plates in clean engine oil before fitting them so they don’t grab or glaze when you first use them.

Can I replace just one or two worn plates?

No. EBC matches and measures each CK kit for correct stack height and recommends against fitting individual plates. Replace the full set.

What are the signs that my Daytona 675 clutch plates need replacing?

Common signs are slipping under hard acceleration, engine revs rising without matching road speed, a clutch that drags or judders, a burnt smell, or plates measuring below the service limit in your Triumph manual.

 

 

The product images shown are for illustrative purposes only and may not be an exact representation of the product received. Manufacturers occasionally make minor cosmetic changes to items, such as color, finish, label, or design. These changes do not impact the item’s function or compatibility. Please contact us if you have specific concerns regarding appearance.

Weight .9 lbs
Dimensions 9 × 6 × 2 in
Year Make Model Engine
Year Make Model Engine
2013 Triumph Daytona 675
2014 Triumph Daytona 675
2015 Triumph Daytona 675
2016 Triumph Daytona 675
2017 Triumph Daytona 675
2018 Triumph Daytona 675
Shopping Cart